Installing Lattice Privacy Fence
Lattice privacy fence – Perhaps you have a patio that you want to do more private, or maybe you want to hide an unattractive air conditioning unit. Whatever the reason, you can create a small fence from vinyl privacy lattice. Vinyl lattice is durable and comes in a variety of colors, so you can create a long lasting fence adapted to your needs. With some basic tools and a bit of physical work, you can fashion a lattice privacy fence.
13 Photos Gallery of: Installing Lattice Privacy Fence
Measure the area you want to fence in. Purchase enough lattice privacy fence sections of equal dimensions area. Use a post-hole digger to dig the 2-foot-by-2-foot hole in the ground. Space the holes out so that they are equal to the width of the sections of vinyl. For example, vinyl sections are 4 meters wide, space holes four meters apart.
Set three shovels full of dirt at the bottom of each hole. The posts shall be 2 meters higher than the height of the lattice panels. Set a level on top of the pillars, and place them until they are level. Pour an 80-pound bag of ready-mix concrete in a wheelbarrow. Making a dent in the middle of the concrete with a shovel. Pour about 3 liters of water in the dent in the middle of the concrete.
Fill the rest of the holes around the base of the post with concrete. Place a section of the lattice between two fence posts, so that the top of the grating is flush with the top of the wooden posts. Continue work to install lattice privacy fence sections so that the tops are flush with the tops of wooden posts until the fence is finished.Incoming search terms: lattice panels